The office seat is mostly a nitrogen-inflated chair, which can be adjusted up and down, but pay attention to the method of use, otherwise it will easily lead to excessive internal air pressure, resulting in a fall injury. Therefore, the correct installation can effectively ensure the safety of use and the effect of use. The following Zhongmin furniture staff will tell you about the installation method of the office chair.

1, inventory office chair manufacturers equipped with spare parts

The public chair spare parts have 5 pulleys, one pressure lifting rod, one five-star foot, one lifting control mechanism tray and one seat.

2, the installation tray

Turn the chair over and remove the screw under the seat cushion and install the tray on the bottom of the seat cushion.

3, the installation pulley

Install the five pulleys on the five feet of the five-star foot and snap them directly on the top. Pay attention to the card.

4, the pressure lifter connects the five-star foot and the seat

Directly place the five-star foot on the ground, connect the thicker one of the pressure lifting rod with the five-star foot, and then install the seat of the tray on the pressure lifting rod. At this time, the office chair combination is installed.

5, check security

Try sitting in the chair and holding the handle of the lifting mechanism tray with your hand to see if it can be used normally.

Heshan Zonman furniture co.,ltd. ,located in Heshan City of Guangzhou Provience, which is a professional office chair manufacturer with 17000M2 modern workshops.

We are coming to a leading player of supplying all kinds of office chairs all over the world(morn than 30 counties) since it's eatablished in 2003.

In order to procide oue customers with satisfied products and service,we set up the professional international sles department and R&D department.